PC Online Web (Blue)

Environment Paints

'Eco and Non Toxic Paint product specialists - Go Green Stay Clean!'

Business No: 85 128 754 950		07 5510 8410 \| Call Today

HARDPAVE paving paint is a single pack water-based coating which cures into a non-toxic film and offers a non-slip floor surface for a range of applications, including a wide variety of floors, garden paths, patios, and even some types of driveway. Other applications include shower surrounds, platforms, walkways, ladders, etc.

HARDPAVE differs from EASYTREAD in that it contains a very fine but hard anti-slip particle which contributes to a tough wear-resistant finish. EASYTREAD on the other hand, contains a resilient and compressible anti-slip particle with a larger particle size. Both products are "ready to use" and do not require the use of messy and time-consuming grit spreading.

The products are also ideal for surfaces which may flex slightly (such as wooden decking and floors) and can tolerate the presence of water, including salt water.

HARDPAVE may also be used in hospitals and retirement homes, etc. since no toxic or offensive fumes are emitted and the products are quick drying. The coating is based upon a high performance acrylic polymer emulsion which dries to a firm and even film. The high molecular weight of the base polymer contributes to the strong pigment binding power of the coating, as well as providing an excellent toughness and durability, combined with a superior adhesion to metals, fibreglass, concrete, wood, etc. The product gives off no fumes or objectionable smells and is pleasant and easy to use, even in confined spaces.

SPECIAL FEATURES:

Gives off no fumes
Quick development of adhesion
Water wash up (no solvents)
Good resistance to abrasion
Easy to roll on or brush
Goes over any clean dry surface

Wide range of colours
Early water resistance
No toxic fumes or solvents
Can be recoated at any time if required
Non toxic in the dry state

HARDPAVE COLOUR CHART

Mission Brown Black Forest Green Light Terracotta Terracotta Ferric Red Beige Light Grey Sky Blue

TYPICAL APPLICATIONS:

p_07_01

Beige HARDPAVE on hotel steps and walkway.

p_07_02

Light Grey HARDPAVE on double width concrete domestic driveway.

p_07_03

Driveway in mission brown HARDPAVE.

p_07_04

Driveway in terra cotta HARDPAVE.

p_07_05

Driveway in ferric red HARDPAVE.

p_07_06

Marine access walkways coated with HARDPAVE for all weather safety.

PHYSICAL PROPERTIES:

Pot Life: Indefinite

Specific Gravity: 1.6 to 1.7

Colours: Forest Green, Ferric Red, Mission Brown, Black, Terracotta, Light Terracotta, Sky Blue, Beige, Light Grey, White. (Other colours by request)

Pack Sizes: 1 Litre, 4 Litre, 10 Litre.

Dilution: No water to be added (If it becomes too stiff, stir in a small amount of WONDERCOAT in the same colour)

Clean up: Water

Recoating Times: Approx 1 - 2 hours (normal conditions, temperatures above 25°C, sunlight, low humidity)

Coverage: 2 coats of the HARDPAVE are recommended. Subsequent coats usually spread further, but coverage rates usually in range 3 to 4 square metres per litre, due to the thickness of the paint film.

Delay Before Use: Under normal conditions the coated floor area may be walked on the following day. Full hardness and resistance is reached after approximately 2 - 3 days from application. Keep vehicles off the surface for 4 - 5 days, and for the first week thereafter, park vehicles on the kerb to allow tyres to cool before driving in.

PRODUCT INFORMATION SHEET:

For your convenience we have provided as a download, a PRODUCT INFORMATION SHEET in Adobe Acrobat format below.

HARDPAVE.pdf

To view a PDF file you must have Adobe Acrobat reader. It is free, and is available below.

Adobe Acrobat (4mb)